Press fn-shift-f10 (or just shift-f10 depending on your keyboard) to open the Windows command line interface.Once booted from the USB Flash drive, the correct Windows drivers can be injected into the version of Windows that is experiencing the INACCESSIBLE_BOOT_DEVICE error. Select EFI volume in the startup selector.Insert the USB Flash drive into an available USB port on the Mac.To inject the drivers, the Mac must be booted from the USB Flash drive. The $WinPEDriver$ folder is important because the $WinPEDriver$ folder contains the drivers for Windows to boot successfully from the USB Flash drive and the hardware on that Mac. Once the Flash drive has been created, it should look like this: To install Windows, make sure that the drivers are valid, and restart the installation”. On the USB Flash drive, open the $WinPEDriver$ and remove the IntelMEI folder. The 2018 MacBook Air (and potentially Macs after that) have cannot load the IntelMEI driver and give a “Windows Setup could not install one or more boot-critical drivers.AutoUnattend.xml provides the location of the $WinPEDriver$ folder to load the drivers during boot. If there is not an AutoUnattend.xml at the top level of the drive (as shown below), download AutoUnattend.xml, unzip it, and add it to the drive.Drag the contents of the Windows Support Software to the USB Flash Drive.Drag all the files and folders from the mounted ISO to the USB Flash Drive.Mount the Windows ISO that was downloaded from Microsoft.Here is a quick summary, so all of the relevant instructions are in the same place: TwoCanoes has also published a page on how to Create a Windows 10 Bootable USB Flash Drive on a Mac. Do save directly to the USB Flash Drive.ĭownload the current install media (i.e an ISO file for both 32-bit and 64-bit machines) from the Microsoft website at Open Boot Camp Assistant in the Utilities folder, and download the current Windows Support Software from the Action menu to your desktop or other location. Quit Disk Utility after this operation completes. In Disk Utility, format the Flash drive as exFAT.Insert an 8GB or larger flash drive into a USB port on the Mac.USB Flash drive (8 GB or larger recommended).To resolve this issue, the correct mass storage device driver can be injected into Windows. This error is caused by the lack of the correct mass storage device driver. In this case, it triggers Windows to start up with a INACCESSIBLE_BOOT_DEVICE error. usr/sbin/installer -pkg “/var/tmp/DSNetworkRepository/Packages/Packages Set 1/Win10_Ann_Block.I thought it would be helpful to share with the community as to how I was able to fix the foregoing issue on my Macbook 12" (2015) after upgrading to OSx Mojave.Īpparently, when upgrading to Mojave, the bootcamp partition was affected in a way that Windows was no longer identify the hard drive that it was installed on because presumably the upgrade process sometimes "deletes" or "removes" or "fails to install" a correct mass storage device driver that lets Windows access or "see" the Mac's internal hard drive. You can see the command that is run that installs the Winclone package in that log: While the package is installing, you can verify progress by opening terminal on the netbooted client and running “tail” on the log: Select the package set in the prior step, and select the Macintosh HD as the target (the package will find / create a boot camp partition on the same physical drive you select): The DeployStudio runtime will appear, and select “Install a package”: Step 4: Verify the package shows up in DeployStudio Admin: In your network repository, add the Winclone package you created in Step 1: See this article for troubleshooting hints: Prior to deploying package with DeployStudio, copy the package to a target mac and verify the package installs correctly by double clicking on it and installing.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |